Names Of The Projector Parts - Digital Projection International iS10 User Manual

1-3. Names of the projector parts

Front of the projector
Carrying handles
Main power switch
Lens
Feet ( in four positions on the bottom)
These feet are to be used in normal installation.
Feet ( in four positions on the top)
These feet are to be used when your projector is installed upside down.
Power cord
Connect the power cord to an AC outlet.
Main power switch
Connect the power cord to an AC outlet and set the main power switch to ON, then your projector
will enter a standby state.
Carrying handles
Hold the carrying handles when carrying your projector.
There are a total of four carrying handles, a set of top and bottom ones on the front and the back of
your projector.
CAUTION
•
Be sure to carry the projector using a minimum of four people.
When moving the projector, do not use any parts other than the carrying handles.
Otherwise the projector may tumble or drop, causing personal injury.
Lens (sold separately)
Images are projected from the lens.
Please contact your dealer/distributor to install or replace the lens.
4 Checking the Supplied Items and the Names of the Projector Parts
Feet (in four position on the top)
Connection terminal
Feet (in four position on
the bottom)
Power cord
Control panel