Step 2: Selecting The Title Of Input Signal - Digital Projection International iS10 User Manual

3-3. Step 2: Selecting the title of input signal

1 Turn on the power to a PC or other source connected to your
projector.
2 Press the MENU button.
3 Press the SELECT
LCD screen.
• At each press of the SELECT
"Setup" ←→ "information."
4 Press the SELECT
The title of input signal is displayed.
• When you have made a wrong selection, press the SELECT
the previous menu.
5 Press the SELECT
be projected" on the LCD screen.
6 Press the ENTER button.
The title of the signal to be projected is selected.
button to display "Source Select" on the
button, the display will cycle as "Source Select" ←→
button.
button to display the "title of the signal to
Projection of Images (Basic Operation)
button. A return will be made to
19