Table of Contents
Advertisement
Control panel
1. LCD screen
The liquid crystal display screen shows menus and setting values for the adjustment of your projector.
2. POWER button
Operate this button to turn on or off (standby) the power to your projector.
When turning on the power to the projector, first set the main power switch to ON, thereby setting
the projector in a standby state. (See page 17)
3. POWER indicator
Green lighting
Green blinking
Orange lighting
Orange blinking
4. STATUS indicator
Off
Green blinking
5. Back light switch
Operate this switch to turn on the back light of the LCD screen.
6. ENTER button
Press the ENTER button, and the displayed menu item is actioned.
7. CANCEL button
Press the CANCEL button to return to the previous menu item.
6
Checking the Supplied Items and the Names of the Projector Parts
12
11
10
9
8
When power is on.
When the lens shutter is closed.
When power is off (in standby state).
When the cooling fan(s) is running immediately after power-off.
When the projector is operating normally.
When an error has occurred.An error code is displayed on the LCD screen.
7
6
5
1
2
3
4
Advertisement
Table of Contents
