1St Lens Frame Adjustment (Projector Method); Service Fixture & Tools - Panasonic LUMIX H-FS14140-S Service Training Manual

7.4.2. 1st Lens Frame Adjustment (Projector method)

IMPORTANT (About 1st lens frame adjustment):
There are 2 kinds of methods to align the 1st lens frame unit for this lens unit.
If you performed "7.4.1. 1st Lens Frame Adjustment (Simple Resolution Checker method)",
skip this section and move on to the "7.4.3. Electrical Adjustment".
7.4.2-1. Service Fixture & Tools
The following service fixtures and tools are required to perform projector method of the 1st Lens Frame Adjustment.
● Lens Projector (SUKZ000030)
● Lens Adaptor (SUKZ000031)
● Projector Chart (SUKZ000032)
● Torx Driver (RFKZ0609)
● Glue for screw Lock Tight : Distributor : ThreeBond Co. No. 1401C (Purchased locally)
● Lens Control Adaptor (Extension cable) for OIS control (SUKZ000033)
● General-Purpose Camera Body (Any LUMIX G series camera body + Battery (Purchased locally)
● Hand Mirror (Purchased locally)
● Tripod (Purchased locally)
● PC (Purchased locally)
● SD Card (Purchased locally)
● Dark Room (Keep measurement distance for at least 3m)
Lens Projector
(SUKZ000030)
Projector Chart
(SUKZ000032)
Lens Adaptor
(SUKZ000031)
28
Lens Control Adaptor
(SUKZ000033)