Panasonic LUMIX H-FS14140-S Service Training Manual page 13

2. Remove 3 screws (F) and Ring Mount Base Unit.
6.1.2.8. Removal of the Wave Washer
1. Remove the Wave Washer.
6.1.2.9. Removal of the 1st Lens Holder and
the Cam Barrel
1. Rotate the Cam Barrel clockwise when you watch
it from back.
6.1.2.10. Removal of the Direct Frame
Shading Sheet
1. Direct Frame Shading Sheet is sticked on the Cam Barrel.
2. Put the sheet so that the lens glass is fullty covered.
3. Insert the small flat blade screwdriver to Gap
(between the Direct Frame Shading Sheet and the 2nd
Lens Frame2 Unit), and peel off the Direct Frame
Shading Sheet gently.
Direct Frame Shading Sheet
6.1.2.11. Removal of the 2nd Lens Frame2 Unit
1. Remove the 2nd Lens Frame2 Unit.
2nd lens frame2 unit