Panasonic LUMIX H-FS14140-S Service Training Manual page 12

6.1.2.5. Removal of the Rear Frame Unit and
the OIS Switch
1. Remove 3 screws (E) and disconnect 1 connector.
2. Remove the Rear Frame Unit.
3. Remove the Hook of the OIS Switch.
6.1.2.6. Removal of the Lens P.C.B. Unit and
the Lens Mount Contact Unit
1. Disconnect 4 connectors.
2. Remove the Lens P.C.B. Unit and
the Lens Mount Connect Unit.
3. Disconnect a connector of the Lens P.C.B. Unit and
remove the Lens Mount Connect Unit.
6.1.2.7. Removal of the Zoom Drive Pin and
the Ring Mount Base Unit
1. Remove 2 screws (G) and Zoom Drive Pin.