Maintenance; Dust / Dirt On The Outer Casing Part(S); Dust / Dirt On The Lens Glasses (Lens Cleaning); Cleaning Procedures Of Outside Surface Of The Lens - Panasonic LUMIX S-E2470 Service Training Manual

5 Maintenance

5.1. Dust / Dirt on the outer casing part(s)

1. Blow off the dust first, then sweep out the dust from narrower spaces with soft cleaning brush.
2. Wipe up the outer casing part with the dry fuzz-free cloth.

5.2. Dust / Dirt on the Lens Glasses (Lens Cleaning)

5.2.1. Cleaning procedures of outside surface of the Lens

1. Blow off the dust on the Lens glass surface with the Blower, gently. (Do not blow strongly.)
2. Wipe out the dirt on the Lens glass surface with Lens Cleaning Kit (VFK1900BK) if necessary.
(Consult the instruction sheet which is included in the Lens Cleaning Kit in details.)
【Cleaning Instruction】
Wipe the Lens surface with
cleaning sheet starting
from centre towards to
outside in a circular motion.

5.2.2. Cleaning procedures of inside surface of the Lens

1. When removing the each above unit, it has to be proceed inside of satisfied clean level.
(Less than class 10,000 (Federal Standard 209D))
As for clean box, refer to the "4 Service Jigs & Tools", in details.
2. Blow off the dust on the Lens glass surface with the Blower, gently. (Do not blow strongly.)
3. Wipe out the dirt on the Lens glass surface with Lens Cleaning Kit (VFK1900BK) if necessary.
(Consult the instruction sheet which is included in the Lens Cleaning Kit in details.)
1st Lens Frame Unit
6-7th Lens Frame Unit
Cleanable area
6