6.2.2.9. Removal of the OIS Switch and
the Rear Frame Unit
1. Hook the upperside hook.
Then, push the underside hook into.
2. Install the Rear Frame Unit.
3. Connect FPC to a connector of the Lens P.C.B. Unit.
4. Tighten 3 screws (E) in numerical order
by using the torque driver with specified torque.
Screw Order
Torque
8 ± 1 N cm
6.2.2.10. Installation of the L Mount Unit
1. Install the L Mount Unit.
2. Tighten 1 screw (C) and 3 screws (D) in numerical
order by using the torque driver with specified torque.
Screw Order
Torque screw (D)
Torque screw (C)
1
20 ± 1.2 N cm
8 ± 1 N cm