7.3. Flow Chart for Adjustment
There are 2 kinds of methods to align the 1st lens frame unit for this lens unit.
Select one of the following method, then proceed it.
(If you choose one & performed it, skip the other one.)
Simple Resolution Checker method
Projector method
< Initial >
Electrical Adjustment
(All item)
Glue 1st Lens Frame Adjustment Pin
*1 NOTE:
Repeat adjustment from 1st Lens Frame Adjustment.
*2 NOTE:
Remove glue on the 2 adjustment pins.
Repeat adjustment from 1st Lens Frame Adjustment.
1st Lens Frame Adjustment
☞
P
C
☞
< Second time >
Electrical Adjustment
(Back Focus only)
Confirm RP
OK
Confirm RP
OK
Finish
Move on to the
"7.4.1. 1st Lens Frame Adjustment
(Simple Resolution Checker method)"
Move on to the
"7.4.2. 1st Lens Frame Adjustment
(Projector method)"
NG
NG
19
*1 NOTE
*2 NOTE