Panasonic LUMIX H-FS14140-S Service Training Manual page 19

6.2.2.11. Installation of the Shading Frame
1. Install the Shading Frame.
2. Tighten 2 screws (B) in numerical order
by using the torque driver with specified torque.
Screw Order
Torque
6.2.2.12. Installation of the Dust Proof Ring and
the Filter Ring.
1. Install the Dust Proof Ring.
2. Install the Filter Ring.
3. Tighten 2 screws (A) in numerical order
by using the torque driver with specified torque.
Screw Order
Torque
10 ± 1 N cm
10 ± 1 N cm
6.2.2.13. Installation of the Decoration Ring
1. Please insert the dent of the Decoration Ring to
convex of the Filter Ring.
Use new one, do not use the one which is removed.
Double-stick tape sticks to the Decoration Ring of
therepair part.
Please remove the old double-stick tape from
the Lens Unit.
2. After installing the Decoration Ring use a soft cloth to
Press it into place.
1