Procedure Of Inspection And Adjustment; Equipment And Chart Setting - Panasonic LUMIX S-E2470 Service Training Manual

7.4. Procedure of Inspection and Adjustment

7.4.1. Equipment and Chart Setting

(2) Checking Chart
(1) LED lamps
Install LED lights left and right symmetrically as uneven
(1)
illumination does not occur.
* The standard illuminance on the surface of all the 5 points of
the chart described as shown in the figure with red marking is
1500±150 lux.
Assemble the Checking Chart and paste the Chart with plastic
(2)
white board on a vertical wall.
* Checking Chart size : H 960mm x W 1440mm
Fix the Camera body and Lens to check on a tripod, and set the
(3)
distance from the Chart as below.
TELE end : About 4,200mm
WIDE end : About 960mm
* Housing space for performance checking is recommended
H:1,500mm x W:2,500mm x D:5,000mm and more.
After fine tune the installation position of the tripod, connect USB cable to PC and execute Resolution Check
(4)
software.
(3) Lens and Master Body(DC-S1R)
26
USB cable
(4) PC Software
illuminance measurement point