Graco ProMix 2KS Operation page 26

Setup Mode
Component
EK (EasyKey)
FP (Fluid Plate)
BC (Booth Control)
C1/C2 (Color Change
Modules 1 and 2)
AK (Autokey)
XP (XPORT)
MC (Micro Controller)
IP (Internet Address)
MAC (MAC address)
26
Table 4: Component Software Versions
Display (may vary
from examples
shown) Description
2.00.012 EasyKey software version.
2.00.012 Fluid Plate software version.
-.- Booth Control not installed, not detected, or not oper-
ational.
1.XX Booth Control software version 1.00 or 1.01.
2.XX Booth Control software version 2.XX.
-.- Color Change Module 1/2 not installed, not detected,
or not operational.
1.XX Color Change Module software version 1.00 or 1.01.
2.XX Color Change Module software version 2.XX.
2K-Manual No AutoKey installed or detected. System operates in
2K Manual Mode only
2K-Auto 2K AutoKey detected. System can operate in 2K Man-
ual, Semi-automatic, or Automatic Mode.
3K-Auto 3K AutoKey detected. System can operate in 3K Man-
ual, Semi-automatic, or Automatic Mode.
V6.6.0.2 Example of XPORT network module software version.
Other versions are acceptable.
1042.0198 Example of fluid plate micro controller version. Other
versions are acceptable.
192.168.178.5 Example of the address EasyKey is set to for basic
and advanced web interface reporting.
00204AAD1810 Example of internet MAC address. Each EasyKey will
have a different value in this format.
312776B