Programs; Loading Programs - Leica EM GP2 Operating Manual

5.3

Programs

Programs are used to save and recall all experiment/sample-specific settings of
the EM GP2 as described in the previous section. Up to 20 programs can be saved
in the instrument's memory, these settings are preserved when the instrument is
switched off.
The program list can be accessed via the "Programs" button on the main screen.
The program list contains the name of the program and the dates of the last use
and modification. The currently active program is highlighted in red. To navigate
the full list of programs (4 pages), use the arrows on the right side of the list.
5.3.1

Loading Programs

To load a program, go to the program list, select the program you want to use, and
return to the main screen.
If changes to the previous program were not saved, a warning will be issued
allowing you to save the changes or to discard them.
Operating Manual EM GP2 Version 11//2017 Page 36