Table of Contents
Advertisement
6 Technical data
6 Technical data
The detailed technical data can be found in the product types' datasheets in conjunction with the technical drawing of the valve
block.
6.1 Medium
Working medium:
6.2 Temperature
Media temperature:
Ambient temperature:
Sterilization temperature:
6.3 Pressure
Operating pressure:
6.4 Product conformity
Pressure Equipment Dir-
ective:
Machinery Directive:
BSE/TSE:
EAC:
Food:
GEMÜ P600S
Corrosive, inert, gaseous and liquid media which have no negative impact on the physical and
chemical properties of the body and diaphragm material.
-10 — 100 °C
0 — 60 °C
EPDM (code 13)
EPDM (code 17)
EPDM (code 19)
PTFE/EPDM (code 54)
PTFE/EPDM (code 5M)
The sterilization temperature is only valid for steam (saturated steam) or superheated water.
If the sterilization temperatures listed above are applied to the EPDM diaphragms for longer periods of time, the
service life of the diaphragms will be reduced. In these cases, maintenance cycles must be adapted accord-
ingly.
PTFE diaphragms can also be used as steam barriers; however, this will reduce their service life. This also ap-
plies to PTFE diaphragms exposed to high temperature fluctuations. The maintenance cycles must be adapted
accordingly. GEMÜ 555 and 505 globe valves are particularly suitable for use in the area of steam generation
and distribution. The following valve arrangement for interfaces between steam pipes and process pipes has
proven itself over time: A globe valve for shutting off steam pipes and a diaphragm valve as an interface to the
process pipes.
Steam input
Process pipe
Steam distribution
Sterile process
0 — 10 bar
2014/68/EU
2006/42/EC
The product conforms to EMA/410/01 revision 3 and is free of animal substances
TR CU 010/2011
3A
FDA
USP Class VI
Regulation (EC) No. 1935/2004
Regulation (EC) No. 2023/2006
Regulation (EC) No. 10/2011
max. 150 °C, max. 60 min per cycle
max. 150 °C, max. 180 min per cycle
max. 150 °C, max. 180 min per cycle
max. 150 °C, permanent temperature per cycle
max. 150 °C, permanent temperature per cycle
8 / 31
www.gemu-group.com
Advertisement
Table of Contents
