Loop Recording - Minolta MN4KPRO User Manual

3. Using Your Camera

3.3 Loop Recording

This function allows you to set a maximum duration for each video clip
recorded.
To switch to Loop Recording mode power the camera on and press the
MODE button, then using the LEFT or RIGHT buttons, select Slow Motion
and press the OK or POWER buttons to enter Slow Motion mode. A
camcorder icon will appear in the top left corner of the screen when you are in
Slow Motion mode.
1. Line up your shot by looking at the LCD screen to see what is in view.
2. Hold the camcorder steady and press the RECORD button to begin
recording.
3. When recording begins, a rolling timer will display in red at the bottom of
the screen. This indicates the recorded video time elapsed.
4. Press the PHOTO button to pause and resume recording. Press the
RECORD button to stop recording.
5.
button to start recording. Half-pressing the SHUTTER button without
releasing will allow the camcorder to refocus the scene while recording.
6. The recorded video files will automatically save onto the inserted memory
card.
3.3.1 Movie Size (Resolution)
Your camcorder has a number of preset resolutions.
1. In Loop Recording Mode press the MENU button.
2. Select
the OK or POWER buttons to enter the
3. Push the ZOOM, UP or DOWN buttons to navigate the menu and press
the OK or POWER buttons to confirm your selected setting (4K60FPS,
4K30FPS, 2.7K30FPS, 1080P60FPS, 1080P30FPS, 720P120FPS,
720P60FPS, 720P30FPS). A higher resolution and faster frames per
second rate will produce a higher quality and larger video file.
using the ZOOM, UP or DOWN buttons and press
-
submenu.
26
RECORD