Table of Contents
Advertisement
3. Using Your Camera
3.4.9 ISO
This function adjusts the light sensitivity in your video.
1. In Time Lapse Mode press the MENU button.
2. Select ISO using the ZOOM, UP or DOWN buttons and press the OK or
POWER buttons to enter the ISO submenu.
3. Push the ZOOM, UP or DOWN to navigate the menu and press the OK or
POWER buttons to confirm your selected setting (Auto, 100, 200, 400,
800, 1600, 3200, 6400).
4. Press the MODE button to exit the submenu or press the MENU button to
exit the settings screen.
3.4.10 Motion Detection
This setting automatically begins recording if movement is detected in front of
the camcorder lens. Once recording, the camcorder will stop recording if no
further movement is detected within a 30-second period of the last movement
registered. You may also manually stop recording anytime by pressing the
RECORD button during a recording or pause the recording by pressing the
PHOTO button. If the recording is stopped manually, then the Motion
Detection feature will be turned off and will need to be reactivated.
1. In Time Lapse Mode press the MENU button.
2. Select Motion Detection using the ZOOM, UP or DOWN buttons and
press the OK or POWER buttons to enter the Motion Detection submenu.
3. Push the ZOOM, UP or DOWN to navigate the menu and press the OK or
POWER buttons to confirm your selected setting (Off, Low, Medium,
High).
4. Press the MODE button to exit the submenu or press the MENU button to
exit the settings screen.
right corner of the touch screen to change chosen
settings.
35
Advertisement
Table of Contents
