Table of Contents
Advertisement
3. Using Your Camera
3.6 Interval Photo
In the interval photo mode, the camera will take a single photo at a set interval
until stopped.
Power the camcorder on and press the MODE button to enter the mode
selection screen. Then press the LEFT or RIGHT buttons to select Interval
Photo mode and press the OK or POWER buttons to enter that mode. You
can also press the mode icon on the right side of the LCD screen to switch to
Interval Photo mode.
1. Line up your shot by looking at the LCD screen to see what is in the shot.
2.
close scenes, half-press the SHUTTER button to refocus the lens on your
target. When the red box outline turns green, the target surrounded by the
box will now be in focus. Now fully press the SHUTTER button to capture a
photo.
3. The number of photos that can be captured at the current resolution will be
displayed at the bottom of the screen.
4. The number of remaining photos is determined by the selected photo
resolution. The higher the photo resolution, the lower the number of photos
you are able to be save to the memory card. Before capturing any photos,
you can select a preferred photo resolution.
3.6.1 Photo Size (Resolution)
Your camcorder has a number of preset resolutions.
1. In Interval Photo Mode press the MENU button.
2. Select Photo Size using the ZOOM, UP or DOWN buttons and press the
OK or POWER buttons to enter the Photo Size submenu.
3. Push the ZOOM, UP or DOWN to navigate the menu and press the OK or
POWER buttons to confirm your selected setting (64MP, 56MP, 48MP,
30MP, 24MP, 20MP, 12MP, 8MP).
4. Press the MODE button to exit the submenu or press the MENU button to
exit the settings screen.
-
40
Advertisement
Table of Contents
