Table of Contents
Advertisement
2. First Use
2.2 Installing the Battery
Insert the lithium-ion battery into the battery slot at the rear of the camcorder
with the metal contacts facing the rear of the camcorder. Take special note of
the ridges on the sides of the battery and the on the body of the camcorder,
these ridges need to line up to install the battery correctly. The battery can
only inserted one way. Mount the battery as shown and push in and up until it
locks into place.
To remove the battery, slide the battery lock tab on the bottom of the
camcorder in the direction of the arrow. While holding battery lock tab open,
slide the battery down and then pull it out away from the rear of the
camcorder.
2.3 Charging the Battery
Connect your camcorder to the included AC adaptor with the USB cable
provided for charging. Open the jack door on the side of the camcorder to
access the charging port. Insert the small end of the USB plug into the
charging indicator light will light up red while charging and will turn off when
charging is complete. Please note: the camcorder can only be charged
from the USB port on the side of the camcorder.
2.4 Powering the Camcorder On/Off
Press and hold the POWER button for 3 seconds to power the camcorder on.
To power the camcorder off, press and hold the POWER button for 3
seconds. The camcorder will automatically power on and off when the screen
9
The LED
Advertisement
Table of Contents
