Table of Contents
Advertisement
2. First Use
2.11.2 Lens Hood
The lens hood is used to reduce the amount of stray light entering the lens
which can create lens flare and reduce contrast. Follow the steps below to
attach the lens hood to the camcorder.
1. Align the mounting mark on the lens hood, indicated by the number 1 in
the image below, with the lower mounting mark on the camcorder, number
2 in the image below.
2. Slide the lens hood onto the camcorder so that the two mounting marks
mentioned in the previous step are touching.
3. Rotate the lens hood in a clockwise direction until the mounting mark on
the lens hood, number 1 in the image below, is lined up with the top
mounting mark on the camcorder, number 3 in the image below.
13
Advertisement
Table of Contents
