Minolta MN4KPRO User Manual page 34

3. Using Your Camera
4. Press the MODE button to exit the submenu or press the MENU button to
exit the settings screen.
3.4.4 Exposure
This function adjusts the frame brightness in your video.
1. In Time Lapse Mode press the MENU button.
2. Select
POWER buttons to enter the
3. Push the ZOOM, UP or DOWN to navigate the menu and press the OK or
POWER buttons to confirm your selected exposure mode (-3, -2, -1, 0, +1,
+2, +3).
4. Press the MODE button to exit the submenu or press the MENU button to
exit the settings screen.
3.4.5 Video Length
This function allows you to set the length of the final time lapse video.
1. In Time Lapse Mode press the MENU button.
2. Select
OK or POWER buttons to enter the Video Length submenu.
3. Push the ZOOM, UP or DOWN to navigate the menu and press the
OK or POWER buttons to confirm your selected exposure mode
(Unlimited, 6 Seconds, 8 Seconds, 10 Seconds, 20 Seconds, 30
Seconds, 60 Seconds, 120 Seconds).
4. Press the MODE button to exit the submenu or press the MENU
button to exit the settings screen.
NOTE: By selecting
recording when the final video is 10 seconds long. The actual length of
time that it will take to record the 10 second video will depend on the
interval duration, see section 3.4.2.
3.4.6 Metering
Metering mode refers to the way in which a camcorder determines the
appropriate exposure (quantity of light reaching the camcorder lens). Spot
metering will only base the exposure setting on a very small area of the
using the ZOOM, UP or DOWN and press the OK or
using the ZOOM, UP or DOWN and press the
submenu.
time lapse will automatically stop
33