Patch Editing - Mooer GEM Box Owner's Manual

01 Select Effect Module
Set the Module Selector to the effect module which you want to
edit, the available setting options are listed below:
01.PATCH LEVEL (Para)
02.PEDAL (Para)
03.COMP/WAH (Type & Para)
04.DRIVE (Type)
05.GAIN (Para)
06.EQ (Type & Para)
07.NR/CAB (Type & Para)
08.MODULATION (Type & Para)
09.RATE (Para)
10.DELAY (Type & Para)
11.D.TIME (Para)
12.REVERB (Type & Para)
13.DECAY (Para)
BANK PATCH
Effect
type
# EDIT
Type: Only select the effect type.
BANK
Effect
type
In fact, the GAIN module is a part of DRIVE module, the RATE module
is a part of MODULATION module, the D.TIME module is a part of
DELAY module, and the DECAY module is a part of REVERB module.
They are all parameter's value setting module which belongs to the
previous effect module.

Patch Editing

Parameter's
value
PATCH
# EDIT
04
03
GAIN
DRIVE
02
COMP/WAH
PEDAL
01
PATCH LEVEL
RHYTHM
Type & Para: The effect type (left
side of the display) and parameter's
value (right side of the display) are
adjusted simultaneously.
Para: Only adjust the
parameter's value.
Parameter's
value
13
06
05 07
NR/CAB
EQ MODULATION
RATE
DELAY
D.TIME
REVERB
DECAY
STORE
PLAY
13
BANK PATCH
# EDIT
08
09
10
11
12