Effect Modules - Mooer BLACK TRUCK Owner's Manual

Effect Modules

BLACK TRUCK has 6 stompbox style effect modules and a built in precision tuner.
06
05
1. COMP: Based on one of MOOER's most popular and useful micro pedals. The
Yellow Comp is an all analogue compressor that can provide all means of
compression from subtle and transparent to squashed and bloomy.
ON/OFF: Switches the COMP effect on/ off
VOL : Adjusts the over-all volume output after the compression. This is very
useful to compensate for perceived volume drop or even to use the compressor
as a boost.
EQ: Adjusts the overall tone of the compressor. Clockwise is brighter, Counter
clockwise is darker
COMP: Simultaneously adjusts the compression ratio, threshold and release.
2. OD: A modified GREEN MILE circuit, the DRIVE module of Redtruck is a warm
and natural analog overdrive circuit with a distinct hump in the mids.
At higher gain settings it can emulate a vintage amplifier being pushed into
breakup. At lower gain settings it is perfect for pushing the HI-GAIN module for
solos or as a warm boost for the guitar.
VOL: Adjusts the output level
GAIN: Adjusts the amount of overdrive
TONE: Adjusts the EQ. Clockwise is brighter, Counter clockwise is darker
01
04 03 02
3. HI-GAIN: Designed exclusively for the BLACK TRUCK, this analog distortion
circuit delivers hi-gain amp like distortion which is perfect for all of your hard rock
and metal needs.
VOL: Adjusts the overall output level
TONE: Adjusts the mid and treble frequencies. Clockwise is brighter and has
more bite. Counter clockwise is warmer and has more mids.
TWEAK: Adjusts the low frequencies. Clockwise has tighter and more focused
bass response, Counter-clockwise has fatter warmer bass.
GATE: Noise gate on/off for reducing unwanted noise at higher gain settings
MID: Boosts/scoops the middle frequencies
GAIN: Adjusts the amount of distortion
4. EQ: An analog Equalizer based on the MOOER GRAPHIC G.
The EQ has 5 adjustable frequencies ranging from 100Hz – 4Khz that can be
boosted or attenuated +/- 18dB. When the frequency slider is set to O then no
boost or attenuation of that particular frequency will occur.
Up = Boost / Down = Attenuation.
LEVEL: Boosts/attenuates the output signal +/- 18dB
POST: Positions the EQ module after the HI-GAIN module in the signal chain.
PRE: Positions the EQ module before the HI-GAIN module in the signal chain.
5. MOD: A digital multi-modulation unit which brings together tremolo, phaser and flanger.
COLOUR: Phaser intensity / Tremolo waveform / Flanger intensity
RATE: Adjusts the modulation effects speed
RANGE: Phaser Depth / Tremolo mix / Flanger waveform delay
Toggle switch: Selects the modulation effect type
Rhythm Knob: Adjusts the sub-division of the modulation effect in relation to
the tap tempo.(X = random pattern)
6. SPACE: A high quality digital delay and stereo reverb module.
MIX: Adjusts the wet/dry mix of the reverb
DECAY: Adjusts the length of the reverb decay time
LEVEL: Adjusts the volume of the delay repeats
FEEDBACK: Adjusts the number of delay repeats
TIME: Adjusts the time between delay repeats
TOGGLE SWITCH: Selects between DLY (Delay only), REV (Reverb only) and
DLY+REV (Delay and Reverb)
TUNER: BLACK TRUCK has an accurate built-in guitar tuner. Press and hold the
TAP foot switch to mute your output and activate the tuner. Press the TAP foot
switch once to exit the tuner and un-mute your output.
EN