RainPoint ITV205 User Manual page 7

ACTIVATE THE TIMER BEFORE USE
Please activate the device before use it for the first time or after a
period of inactivity.
lf yes, the timer valves are normal, please use it with confidence!
If not, please repeat the step 2-5 several times or contact RAINPOINT
support team immediately.
Note: When testing, please keep away from the water timer outlet to
avoid being splashed and wet.
1) Keep the garden faucet turned off.
2) Turn the timer dial to "ON".
3) Press and hold the "MANUAL" button for 3-5s
to enter Manual Watering Mode.
4) Press the "ZONE" button twice to select
both Zone 1 and Zone 2. When the screen
flashes, immediately press the "OK" button to
start manual watering.
5) After hearing 2 "click" sounds or waiting for
about 5 secs, the valves in the timer are
opened, and then turn the dial to "OFF" to
close the valves.
6) Repeat the step 2-5 for 3-5 times.
7) Test: Turn on the faucet a little bit, and then
repeat the step 2-5 to check if the water flow
out or shut off as expected.
- 06 -