BATTERY STATUS
Battery Status will be displayed as following:
Full
Note: When the low battery indicator appears, the valve will close
automatically to avoid leakage. Please replace the battery to recovery.
TROUBLESHOOTING
lssue
The water inlet
leakage
The water
doesn't stop/
flow out
Dial or button
problems
Low Power
Possible Cause
1) No filter or not
beplaced
horizontally.
2) The faucet is not the
Right standard 3/4" .
1) Long-term storage
and transportation
make the valve
inactive.
2) Valve blockage.
1) The dial/valve is stuck.
2) Accidentally holding
the OK button while
inserts the batteries.
- 15 -
Advice
1) Add filter and make
sure it' s placed
horizontally in the
inlet.
2) Make sure the faucet
is a 3/4" faucet.
3) Strengthen it with
Seal tape.
1) Keep the tap turned
off and turn the timer
dial to ON.
2) Select the zone you
want to fix (ZONE 1 or
ZONE 2) and run
manual watering for
3-5s and stop it.
3) Repeat the Step 2 for
5 to7 times.
4) Try using it normally.
1) Same procedure as
above.
2) Turn the dial to the
OFF to check if the
valve can be closed.