Page 1
USER MANUAL English Español Model: TTV102B+TWG009BW Email: service@rainpointus.com WhatsApp: +1 626-780-5952 US: 1-833-381-5659 (EN) EU: +44 800-808-5337 (EN DE)
Page 2
WARM TIPS PLEASE READ BEFORE USING Don’t use the water timer when the temperature is below 37°F(3°C), and please store the timer indoors to avoid potential freezing damage. The filter traps dirt particles, preventing them from entering the timer and causing clogging. Please clean the filter regularly and replace it if worn.
CONTENTS INTRODUCTION CONTENTS IN THE BOX PRODUCT OVERVIEW PRODUCE SPECIFICATIONS INSTALLATION 1. INSTALL APP ON YOUR PHONE 02-05 2. PAIR THE IRRIGATION GATEWAY 06-07 3. CONNECT THE BLUETOOTH IRRIGATION TIMER 4. ADD BLUETOOTH IRRIGATION TIMER TO IRRIGATIONGATEWAY 5. INSTALL THE BLUETOOTH WATER TIMER 6.
INTRODUCTION CONTENTS IN THE BOX A. 1 x TTV102B 1 Zone Bluetooth Irrigation Timer B. 1 x TWG009BW Irrigation Gateway C. 1 x Instruction Manual D. 1 x Quick Setup Guide Product Overview TTV102B Bluetooth Irrigation Timer TWG009BW Irrigation Gateway...
1. Plug your Irrigation Gateway to an indoor power source near your WiFi router and the outdoor location of your timer 2. Open the RainPoint App and tap '' A dd device ''or ''+'' to add a new device. 3. Tap ''Smart Irrigation'' and ''Add Manually''.then select...
Page 6
4. Plug the TWG009BW Irrigation Gateway into an outlet near the router and wait 10 seconds for the device initialization to complete. Press and hold for 5 seconds until the blue indicator light is always on and the red indicator light is blinking slowly, Then the APP will search and pair your Irrigation Gateway automatically.
Page 7
2.4Ghz or 5Ghz WiFi, please tap the blue words Common router setting method to name the 2.4Ghz WiFi differently, then you can select it individually. If you encounter problems during the connection process, please search @RainPoint on Youtube to watch the operation video, or contact us at service@rainpointus.com. - 04 -...
Page 8
6. After the connection is successful, the color icon of Irrigation Gateway will be displayed on the APP home screen. - 05 -...
3. CONNECT THE BLUETOOTH IRRIGATION TIMER 1. Insert 3 *AAA alkaline batteries into the battery tray of the timer. Restore the battery tray and make certain it is secured. 2. Return to the APP home screen, and tap " + "to add the WiFi timer 3.
Page 10
4. Press and hold the button on the timer until the Blue LED indicator blink rapidly (2 times per second). Then select "confirm indicator rapidly blink"and tap Next. The APP will search and pair your Bluetooth Water Timer automatically. 5. Click " +" on the right side of the device to add the device, and then click "Done"...
4. ADD BLUETOOTH IRRIGATION TIMER TO IRRIGATION GATEWAY 1: Go to the home page and 2: Click on Add Device click on the gateway 3: Select Add existing 4: Select the timer and confirm When you add the timer to the Irrigation Gateway it becomes a remote controllable timer - 08 -...
5. INSTALL THE BLUETOOTH WATER TIMER 1) Turn off the garden faucet. 2) Wrap Teflon Tape around the faucet threads. 3) Screw the timer to the garden faucet and make the display is as vertical as possible to the ground to prevent rainwater from accumulating and leaking into the interior.
6. TEST BEFORE USE Congratulations, you have completed the connectionand installation of the Bluetooth Irrigation Timer. Please test whether the internal valve of your water timer is normal before using it. 1. Keep the faucet turned off. 2. Press the button of the timer , with a "click" sound,the valve inside the timer opens for manual watering.
Add Devices You can add multiple All Devices RainPoint devices on A check list of all the the APP to create a devices you have smart home irrigation connected. Tap to system.
BLUETOOTH IRRIGATION TIMER Tap the Bluetooth water timer on the all devices list of APP home screen. It will display all the parameters and functions of the timer manually set on the APP. Note: The Bluetooth timer will follow and perform the preset watering schedule after application set successfully, even if the phone or device loses network connection.
Page 16
the “Device" name on the screen to setup. You can change the Device profile for device name. You can name your Bluetooth timer if you have more than one.This helps you identify your timers. - 13 -...
Operating Method 3:Bluetooth Timer Press and hold the gray button of the Bluetooth timer, you will hear a "di" sound that means the valve is open and the blue light is flashing. Press again to close the valve. Manual Irrigation Duration 1.
Manual Rain Delay Rain delay applies to rainy days. During the rain delay, the timer stops watering. After the rain delay ends, the timer will be executed according to the next watering plan. The timer can set 24/48/72 hours of rain delay. - 16 -...
How to set the Normal Schedule ? 1. Click to enter the setting Normal Schedule. 2. Tap to enter the Normal Schedule. How to set the Cycle&Soak Schedule ? 1. Click to enter the setting Cycle&Soak Schedule. 2. Select Cycle&Soak watering mode. - 17 -...
SMART AUTOMATION Automation & Tap-to-Run Automation means the devices can execute automatically according to the set conditions such as the local weather, device status and time. Tap-to-Run means you can control multiple devices and plans with one tap. - 18 -...
Steps To Set Automation Or Tap-To-Run 1. Set a condition: According to your needs, set the conditions for automation or tap-to-run. 2. Set tasks: Set the tasks that the device needs to perform when the conditions are met. 3. Save the settings: The device will automatically execute according to what you set.
Home Management 1. Tap Me at the bottom of the APP home screen. 2. Select Home Management. 3. Set your home name, room management and home location. - 20 -...
RESET THE DEVICE How to reset the Irrigation Gateway ? Step 1. Power OFF or Remove the Bluetooth Hub from the power source. Step 2. After 10 seconds, power on or plug the Bluetooth hub to the power source. Step 3. Press and hold the middle button on the Bluetooth hub without releasing the button until the indicator light quickly flashed (2 times per second), then the Bluetooth hub is restored to pair mode.
TROUBLE SHOOTING Issue Possible Cause Advice 1. Can't turn on 1. Low battery 1. Replace freshbatteries . /off the valve 2. Impurities in water 2. Regularly clean the filter inlet port of impurities to 3. Unstable network or avoid disruptions in use. delayed response 3.
Page 26
Issue Possible Cause Advice 1. Inlet impurities need 4. Plan not 1. There are impurities to be cleared regularly in the water inlet executed so that they do not filter. on time clog up and interfere 2. Set rain delay with the irrigation parameter.
Issue Possible Cause Advice 6. Low water 1. Filter blockage. 1. Check if the filter is pressure Inlet pressure not clogged, if so,clean sufficient to support or replace the filter. 2. watering Make sure the timer is installed properly and not cross-threaded.
FCC Notice: FCC STATEMENT: (FCC ID: 2AWDBTTV102B FCC ID: 2AWDBTWG009BW) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
CUSTOMER SERVICE Still have trouble with setup, please search for "RainPoint" on YouTube for installation videos! If the user manual doesn't have what you're looking for or you need other help, please contact us before returning the product to the store and let us know the LOT NO.