RainPoint ITV205 User Manual page 14

MANUAL/HAND WATERING
Turn the dial to
"ON", press and
hold the
"MANUAL" button
This function allows you to manually water without interrupting your
set watering schedule. To access this feature, please follow the steps
below.
1) Turn the dial to "ON".
2) Press and hold the "MANUAL" button for 3-5s to enter the Manua
Watering Mode.
3) Press the "ZONE" button to select which zone you want to use.
Zone 1 only
4) Use the "+" or "-" button to adjust the manual watering time from 1
minute to 8 hours. (Press and hold the "+" or "-" button to quickly
increase or decrease the time.)
5) Press the "OK" button immediately when the screen flashes to
confirm and start the manual watering. The screen will show the
pattern and the remaining time for manual watering.
6) To stop the manual watering, hold the "MANUAL" button for 3-5s to
exit the manual watering mode and restore the original watering
program.
NOTE: Please remember to press the "OK" button after setting the
manual watering time to start manual watering. Otherwise, the manual
watering setting will be automatically exited after the screen flashes
for about 3-5s.
Press the "ZONE"
button to select
the zone to be
watered
Zone 2 only
- 13 -
Press the "+" or "-"
button to adjust
the manual
watering time
Zone 1 and Zone 2
Press the "OK"
button to start
manual
watering