Programming Midi Stops - Johannus Rembrandt 377 AGO User Manual

28
5. Use the - and + pistons to select the desired MSB number (MSB:..)
6. Press the SET piston.
7. Use the - and + pistons to select the desired LSB number (LSB:..).
8. Press the SET piston.
9. Use the - and + pistons to select the desired MIDI voice number
(Voice:..).
10. Press the SET piston. The selected adjustments are now stored in
memory.
11. Select another MIDI stop to be programmed, if desired.
12. Press the MENU piston to return to the main menu.
13. Press the MENU piston again to exit the Easy Menu.
Programming voice on MIDI stops for internal CSM
1. Press the MENU piston. Browse to the CSM with the - and + pistons.
2. Press the SET piston.
The selected MIDI stop appears on the display: MIDI:
Below the selected stop, the voice (instrument), ON/OFF and the number of
programmed stops is given.
3. Use the - and + pistons to select the desired MIDI voice.
4. Press the SET piston.
The OFF turns ON and the number of programmed stops increases. The
voice is now playable on the MIDI stop.
When you press the SET piston again, the ON turns OFF and the
number of programmed stops decreases. The voice is turned off.
Hold the CANCEL piston and then press the SET piston if you want
to turn off all the voices that are programmed on the selected MIDI
stop.
You can repeat steps 1 to 4 to get more voices on the selected MIDI stop.
5. Press the MENU piston to return to the main menu.
6. Press the MENU piston again to exit the Easy Menu.