4.11.11 General Crescendo - Johannus Rembrandt 377 AGO User Manual

4.11.11 General Crescendo

26
a. Use the - and + pistons to select ON or OFF to switch the Surround
system on or off. Select OFF to exit the Std. Intonation function.
Select ON to go to the volume settings of the Surround system.
b. Use the - and + pistons to select the volume for the left channel.
c. Press the SET piston. The selected volume is stored in the memory.
d. Use the - and + pistons to select the volume for the right channel.
e. Press the SET piston. The selected volume is stored in the memory. You
return automatically to the main menu.
8. Press the MENU piston to exit the Easy Menu.
With a General Crescendo different registrations can be activated in steps.
These registrations start with very quiet (pianissimo) to very loud (tutti).
Activate the General Crescendo
When the General Crescendo is not activated, the CR:-- message is on the
display.
1. Press the CR piston to activate the General Crescendo. The display
indicates which step has been set.
Change the General Crescendo
The default set stop combinations of the crescendo steps can be changed
and saved in the memory.
Only step 0 cannot be changed.
1. First press the CR piston and then the MENU piston.
2. Use the - and + pistons to select the step to be changed.
3. Set the desired registration for the step.
4. Press the SET piston.
5. Select another step to be changed, if desired.
6. Press the MENU piston to switch off the programming function.
7. Press the CR piston to switch off the General Crescendo function.