Table of Contents
Advertisement
The foot fixation returns to its neutral position when
not in use. The neutral position can be determined by
sliding the balance block.
1. Loosen the two nuts a few turns with a
socket wrench.
2. Slide the balance block into the desired
position. Then re-tighten the nuts.
The footrest is also adjustable in width. Only the
outer footrest can be moved.
1. Loosen the two bolts a few turns with an
Allen key.
2. Move the footrest half to the desired
position. Then re-tighten the nuts.
With the pedal extension, the footrest halves can
be pushed further apart.
Tip: When adjusting the footrest, bring the rear
parts together in a V-shape. This will give you a
better fit, as a foot is narrower at the back than
the front.
The small footrest (Fix20) is suitable for size
22 to size 36. The width of the reach of this
footrest is min. 6.5 cm to max. 9 cm. The large
footrest (Fix25) is suitable from size 37 to
size 48. The width of the reach of this
footrest is min. 8.5 cm to max. 13 cm.
Version 24.01
1.
1.
2.
2.
35/51
Advertisement
Table of Contents
