Table of Contents
Advertisement
Easy Sport
Seating position and frame length
By default the bike is fitted with a derailleur.
Therefore, the length of the chain does not have
to be alterd when the length of the bike changes.
The range of this mechanism however, is
limited. In case more chain length is needed for a
correct position of the derailleur, or a larger
range is needed, you can re-position the chain
tensioners or extend the chain, see "setting the
chain tension".
A rule of thumb for a correct seating position is
as follows. The driver sits on the bike and puts
one foot on the pedal that is furthest away from
the driver. Now set the seating position to where
the leg is stretched, yet still relaxed. The most
comfortable seating position however, you have
to decide for yourself. The seating position can
be changed by altering the frame length. In order
to do so. Follow these steps:
1.
Use a spanner to loosen up the bolt of
the steering rod [A].
2.
Use an hex key to loosen up the two
bolts of the frame clips [B and C].
3.
Move the front of the frame and set it
to the desired length. Caution! The
frame may not be extended further
than the marking on the inner tube [F].
4.
Make sure that the line on the inner
tube [D] aligns with the position of the
sticker marker [E].
5.
Now using a hex key tighten the two
bolts on the frame clips [B and C].
Version 24.01
[A]
[B]
[E]
[F]
[C]
[D]
11/51
Advertisement
Table of Contents
