Table of Contents
Advertisement
Manually operated rear light
The rear light has an on/off button with which Off-
Auto-On can be set.
The seating is as follows:
Press 1x lighting is on
Press 2x lighting is automatic
Press 3x lighting is off
In the "On/Off" position, the rear light can be switched on or
off manually.
In "Auto" mode, the rear light turns on or off automatically
using light and motion sensors. If no movement is detected
after some time, the lighting will switch off automatically.
The headlight works with batteries. When the
batteries are almost empty, a red LED on top of the
rear light will flash. Follow the steps below to
replace the batteries.
1.
Remove the cover from the housing by pressing in
the lip on the bottom.
2.
Replace the alkaline batteries (1.5 V – 1500 mA)
and fit the cover.
Batteries pollute the environment. When
disposing of, please follow local regulations.
Version 24.01
1x = ON
2x = AUTO
3x = OFF
1.
2.
17/51
Advertisement
Table of Contents
