OREC SNOW RHINO Owner's Manual page 35

Check for:
Loosening
Belt
Damage, cleanliness
Abnormal noise, strange
heat/movement
Trans
Oil quantity, cleanliness
mission
Oil leakage
Cracking or deformity,
Body mounting nuts and bolts are
loose or mission.
Cracking, deformity,
Cover
corrosion
Damage, loosening, rattling
Levers
of levers and wires, loss of
/Wires
split pins
Blade's condition, wear &
Plow
Blade tear
Tension of rubber crawler
Cracking, damage, wear and
tear
Metal, stones, etc, stuck in
Tracks
the track
Loose or missing nuts and
bolts
Rattling, strange noise
Labels* Damage
If you do not understand any of these points, please consult with the retailer where you purchased
this machine.
Inspection Content
Desired Result
There is suitable tension on the belt.
Not cracked, damaged, dirty.
There are no abnormalities, strange
noises or heat, when running the
machine.
There is a suitable quantity of oil and
it is clean. No water or air in HST oil
Oil seal, packing parts are not
leaking oil.
Frame is not cracked or deformed.
Nuts and bolts are secure.
No cracking, deformity, corrosion.
When moving, there are no
damaged, rattling, or loose or
missing parts.
No damage, deformity, wear
No loosened bolts & nuts
Standard tension is observed.
No cracks, damage or wear and tear.
There is no debris in rubber crawler.
Nuts and bolts are not loose or
missing.
Mounted parts do not rattle or are
missing.
Warning labels and nameplate are
attached and easily readable.
--35--
:
I ns pec ti on
freq.
D M Y
✓ ✓
✓ ✓
✓ ✓
✓ ✓
✓ ✓
✓ ✓
✓
✓ ✓ ✓
✓ ✓ ✓
✓ ✓ ✓
✓ ✓ ✓
✓ ✓ ✓
✓ ✓ ✓
✓ ✓ ✓
✓ ✓
✓ ✓