OREC SNOW RHINO Owner's Manual page 18

4.2.4 Operating Plow Blade
Blade up and down
Up
CAUTION
・ When the blade moves all the way up or all the way down, it can't move any further. Release the plow
blade adjustment lever immediately, otherwise it will damage the hydraulic actuator.
Blade angle
Release lever
30°
15°
0°
CAUTION
・ When changing the plow blade angle, always rise the blade up from the ground and never attempt
while driving or in narrow area for safety. If the plow blade angle arm is hard to move, turn off the
ignition key and remove the object that is obstructing the plow blade angle adjustment.
Down ・ Move the plow blade height adjustment lever forward /
backward.
-Move forward: blade goes up
-Move backward: blade does down
・ The blade will stop when you release the plow blade height
adjust lever.
・ Grab the release lever then move the plow blade angle
arm forward / backward.
-Move forward: blade swings left
-Move backward: blade swings right
・ When the lever is released, the plow blade can lock at 0, 15,
30 degrees on either side. Be sure the plow blade is securely
locked before operating.
--18--