OREC SNOW RHINO Owner's Manual page 17

4.2.2 Turning
WARNING
・ The machine moves at the highest speed when you tilt the control lever all the way. Do not turn
while operating at high speed to prevent fall out or injury. Always use a safe speed when turning.
4.2.3 Park
Main Clutch Lever
CAUTION
・ Park the machine on a flat surface in a wide open space
・ When leaving the machine unattended, ALWAYS turn off the engine and remove the ignition key.
・ When tilting the control lever R to forward,
the right track spins and turns the machine to
the left.
・ When tilting the control lever L to forward, the
left track spins and turn s the machine to the
right.
・ Move both control levers to neutral position, then move the
main clutch lever to [PARK] position.
・ Move the throttle lever to low then turn the ignition key to
[OFF] position.
--17--