OREC SNOW RHINO Owner's Manual page 16

4.2 Operation (Removing the snow)
CAUTION
・ Always wear appropriate winter wear and shoes, gloves, hats, etc . for safe operation.
4.2.1 Move Forward & Backward
High
・ Start the engine.
・ Move the high-low range sift to either side
Note: use [Low] at first.
Low
・ Step on the platform. Move main clutch lever to the
"WORK" position.
Note: Unless operator is on the platform or it was fold and
locked. The safety sensor will shut off the engine.
・ Slowly tilt both control lever forward to go forward.
Slowly tilt them backward, to go reverse.
To change machine direction, ALWAYS watch around to
prevent accidents. Especially when you are operating the
machine in reverse.
Do not operate the control lever and set them in neutral
positions when you move the main clutch lever to WORK
from Parking.
Forward
・ By tiling the control lever, the machine speeds up. Do not
move the control lever suddenly. Always operate with
comfortable speed.
・ Raise the plow blade above the ground when in reverse.
Reverse
WARNING
CAUTION
--16--