Seq (Sequencer); [Ut 16] Click 4 - Yamaha DTXTREME Reference Manual

3 Vol
Set the volume of the on-beat click.
Settings: 0 - 127
4 Tuning
Set the pitch of the on-beat click.
Settings: -24.00 - +24.00

[UT 16] Click 4

In this page, you can select the off-beat click
sound (played between every beat of the
measure).
If the VoiceSet in [UT 13] is not a UserVoice, <--->
will be displayed and this will be unavailable.
The available parameters are as follows.
1 2
1 Type
Select the category of the voice to be used for the
off-beat click.
2 Voice[Low]
Select the number and name of the voice to be
used as the off-beat click. You can select from the
voices in the category selected in "Type".
Settings: Drum voice number and name
3 Vol
Set the volume of the off-beat click.
Settings: 0 - 127
4 Tuning
Set the pitch of the off-beat click.
Settings: -24.00 - +24.00

SEQ (Sequencer)

Set the DTXTREME's sequencer-related settings
here.
[UT 17] SEQ1
In this page, you can set the sequencer's MIDI-
related parameters. The available parameters are
as follows.
1 MIDICtl
Enable or disable the reception and transmission
of MIDI Start, Stop and Continue messages.
Settings: off, on
3 4
2 SyncMode
Set the type of synchronization used when the
DTXTREME is connected to a drum machine or
some other external MIDI device.
internal: The external MIDI device is
synchronized to the DTXTREME.
external: The DTXTREME is synchronized to the
external MIDI device by receiving the timing
clock (F8) at MIDI IN or TO HOST.
Settings: internal, external
[UT 18] SEQ2
In this page, you can set the sequencer's
operations. The available parameters are as
follows.
79
1 2
1 2 3