Measure-Level Editing - Yamaha DTXTREME Reference Manual

1 Copy From Song
Select the source song from which you wish to
copy data. The song number will be displayed.
Settings: P1-P31, Q1-Q67, R1-R66, U1-U32 (songs held on
a memory card cannot be copied)
2 Track To
Select the track number of the source song from
which you with to copy data.
Settings: 1, 2
3 Track
Select the track number of the current song to
which you wish to copy data.
Settings: 1, 2
Procedure
1.
Use the center Data Control knob to select the
source song (preset or user song) from which
you wish to copy data.
2.
Use the Data Control knob for "Track to
select the track from which you wish to copy
data.
3.
Use the Data Control knob for "Track
select the destination track to which you wish
to copy data.
4.
Press the ENTER/YES button and you will see
an "Are you sure? message.
"
5.
Press the ENTER/YES button again and the
track will be copied. If you press the EXIT/NO
button instead, the track will not be copied
and you will be returned to Drum Kit Play
mode.
[Song7] SONG CLEAR TRACK
You can clear data that exists on either track in
the current song.
1 Track
Select the track you wish to clear.
Settings: 1, 2
Procedure
1.
Use the center Data Control knob to select the
track you wish to clear.
2.
Press the ENTER/YES button and you will see
an "Are you sure?" message.
3.
Press the ENTER/YES button again and the
to
"
track will be cleared. If you press the EXIT/
NO button instead, the track will not be
cleared and you will be returned to Drum Kit
Play mode.
to
"

Measure-level Editing

[Song8] SONG COPY MEASURE
You can copy data in the specified measures on a
track of a preset or user song to the specified
measures on a track of the current song. Any data
that exists in the destination measures will be
overwritten by the copied data.
n There are many parameters that can be specified in
this job so they have been divided into two pages:
one for source settings and the other for destination
settings.
64
1