[Ut 14] Click 2; [Ut 15] Click 3 - Yamaha DTXTREME Reference Manual

2 Output
Select the output for the click sound. You can
choose from stereo (the main OUTPUT L/R
jacks), phones (headphone jack), st+ph
(OUTPUT L/R and headphone jacks) and indiv1
to indiv6 (one of the individual output jacks).
Settings: stereo, phones, st+ph, indiv1 - indiv6
3 Mode
Select the click mode.
manual: The click can only be enabled or
disabled by the CLICK button.
play: The click can be enabled or disabled by
the CLICK button. It is also enabled when the
sequencer starts playing and disabled when it is
stopped.
rec: The click is enabled or disabled by the
CLICK button. It is also enabled when the
sequencer starts recording and disabled when it
is stopped.
play&rec: The click is enabled or disabled by
the CLICK button. It is also enabled when the
sequencer is playing or recording and disabled
when it is stopped.
Settings: manual, play, rec, play&rec
4 MIDIOut
Enable or disable the transmission of the click as
MIDI events.
Settings: off, on

[UT 14] Click 2

In this page, you can select the accented click
sound (played on the first beat of the measure).
If the VoiceSet in [UT 13] is not a UserVoice, <--->
will be displayed and this will be unavailable.
The available parameters are as follows.
1 2
1 Type
Select the category of the voice to be used for the
accented click.
2 Voice[High]
Select the number and name of the voice to be
used as the accented click. You can select from
the voices in the category selected in "Type".
n Any voice that is used in a drum kit can be selected.
3 Vol
Set the volume of the accented click.
4 Tuning
Set the pitch of the accented click.

[UT 15] Click 3

In this page, you can select the on-beat click
sound (played on every beat of the measure
other than the first).
If the VoiceSet in [UT 13] is not a UserVoice, <--->
will be displayed and this will be unavailable.
The available parameters are as follows.
1 Type
Select the category of the voice to be used for the
on-beat click.
2 Voice[Mid]
Select the number and name of the voice to be
used as the on-beat click. You can select from the
voices in the category selected in "Type".
3 4
78
Settings: Drum voice number and name
Settings: 0 - 127
Settings: -24.00 - +24.00
1 2
Settings: Drum voice number and name
3 4