Yamaha DTXTREME Reference Manual page 74

3 TrgSet
Select a trigger set for preset drum kits. By
"trigger set," we mean the settings for each pad
as set in the [TrgSens1] to [TrgSens3] pages in
Drum Kit Trigger Edit mode. The following four
types of trigger sets are available. The trigger set
selected here will always be used when selecting
a preset drum kit.
Input
no.
Type 1 Type 2
input1 RH RH
input2 RH T P
input3 RH T P
input4 RH T P
input5 RH T P
input6 PCY PCY
input7 PCY PCY
input8 T P T P
input9 RHkick K P
input10 RHkick K P
input11 PCY PCY
input12 T P T P
input13 PCY PCY
input14 T P T P
input15 T P T P
input16 T P T P
Relationship between pad and display
Display Connected pad type
RH RHP80/100/120(SD)
RHkick KP120
T P TP80S/80/60
PCY PCY80S/80/60/10
K P KP80S/80/60
Settings: 1 - 4
4 EdgeAdj
Set how easily you can play the voice assigned to
the edge portion of the pad when the position
sensing feature is enabled.
Settings: -64 – +63
n To enable the position sensing, connect the PH120SD
pad to the trigger input 1 (SNARE).
[UT 7] SYSTEM 3
In this page, you can set the hi-hat and pad
settings. The available parameters are as follows.
1 2
Trigger set
Type 3 Type 4
RH T P
T P T P
T P T P
T P T P
T P T P
PCY PCY
PCY PCY
T P T P
RHkick K P
RHkick K P
PCY PCY
T P T P
PCY PCY
T P T P
T P T P
T P T P
3 4
1 FCoffset
Set an offset value to be added to the hi-hat
controller input value. This function simulates the
opening between top and bottom hi-hat cymbals.
You can adjust the triggering point where the
closed hi-hat voice plays as the pedal is
depressed to the floor. The smaller the value, the
faster the sound will appear (i.e., the nearer the
triggering point is to the fully released pedal
position).
Settings: +32 - -32
2 FCspt
Set the time for the footsplash effect. This
function simulates the sonic effect of a closed hi-
hat being half-opened (as the pedal position
changes from being fully depressed to half
depressed). The larger the value, the sooner the
footsplash effect will appear, although the effect
will also erroneously appear if you repeatedly
press the pedal.
Settings: 0-127
3 IncFunc
The pad connected to the trigger input specified
here can act as the Increment switch, regardless
of the Trigger Function settings (page 29). In
Drum Kit mode, this feature lets you use the pad
to switch to a different drum kit. In Chain Play
mode, the pad can be used to move forward a
step in the sequence.
Settings: off, IN1 - IN16
4 DecFunc
The pad connected to the trigger input specified
here can act as the Decrement switch, regardless
of the Trigger Function settings (page 29). In
Drum Kit mode, this feature lets you use the pad
to switch to a different drum kit. In Chain Play
mode, the pad can be used to move backward a
step in the sequence.
Settings: off, IN1 - IN16
74