Common Parameters; [Footsw2] Foot Switch 2; [Common1] Common 1 - Yamaha DTXTREME Reference Manual

3 MIDI (Transmit Channel)
Set the MIDI channel used to transmit control
change messages when the "Func" parameter has
been set to "MIDI."
Settings: MIDI channel: 1 - 16
4 Type
Set the controller number transmitted when you
press the footswitch with the "Func" parameter
set to "MIDI."
Settings: Ctl1- Ctl119 (Controller number)

[FootSw2] Foot Switch 2

Set the control value transmitted when the
footswitch is pressed with the "Func" parameter
set to "MIDI."
1 2
1 OnValue
Set the control value transmitted when the
footswitch has been pressed.
Settings: 0 - 127
2 OffValue
Set the control value transmitted when the
footswitch is released.
Settings: 0 - 127

Common parameters

Set the parameters common to the current drum
kit.

[COMMON1] Common 1

Set the volume of the entire drum kit and
accessibility to the Memory Card.
1
1 Volume
Set the volume of the drum voices (MIDI channel
10). This applies to the internal tone generator
but not to external MIDI devices.
n This is the same as the Volume parameter for
"Ch=10" in the [MIDI2] page (page 51) of Drum Kit
Voice Edit mode.
Settings: 0 - 127
2 WaveDir (Wave Directory)
Specify the directory on the Memory Card from
which the wave or User Voice data will be read.
If you select a drum kit while using a Memory
Card, the files in this directory will be read.
However, if no Memory Card has been inserted,
the "No card" message will be displayed and you
will be unable to specify a directory. See page 80
for details about the directory structure.
Settings: Directory name on Memory Card
n If "VOLUME" has been selected in the [UT 19] page
(CARD LOAD) in Utility mode (page 81), in
additional to wave and User Voice data, you will also
be able to load data of drum kits and songs.
40
2