Yamaha DTXTREME Reference Manual page 35

2 Note
Select from 6 numbers (1st to 6th), mute or rim.
Velocity crossfades are assigned to the numbers
or parameters selected here.
Settings: 1st, 2nd, 3rd, 4th, 5th, 6th, 7th, 8th, 9th, mute or
edge, rim or open, clse, fcls, spls, rim
3 VelXFade (Velocity Crossfade)
Assign velocity crossfade curves up to the 6 notes
(1st to 6th). You can choose from a variety of
curves that define the volume to velocity, and
then assign them to multiple notes. For example,
you could assign the curve 2 to the first note and
the curve 3 to the second note. You can control
the volume balance between these two notes by
hitting the associated pad harder or softer. As
shown in the illustration below, 1st note will play
louder when you play softer (generate a small
velocity value) and 2nd note will play louder
when you play harder ( generate a large velocity
value).
Volume
1st
2nd
0
The following curves are available.
1
3
5
7
9
Velocity
Settings: Velocity crossfade: 1 - 10
n This is only available if multiple MIDI note numbers
35
2
Volume
0
Velocity
4
Volume
0
Velocity
6
Volume
0
Velocity
8
Volume
0
Velocity
10
Volume
0
Velocity
have been assigned in the Note# parameter in the
[TrgMIDI2] page.
Volume
0
Velocity
Volume
0
Velocity
Volume
0
Velocity
Volume
0
Velocity
Volume
0
Velocity