Seq (Sequencer); Click Hi; Click Mid; Clickmid - Yamaha DTX Owner's Manual

Feature Reference — Utility Mode

29 SEQ (sequencer)

The SEQ sub-mode contains the settings related
to the CLICK and synchronization. Select the
parameters between this page and the 40th page
using the PAGE¡ or PAGE⁄ buttons. This
function is mainly used to synchronize the
metronome or external MIDI device.
A Move from this page to other sub-modes by rotating the
Data Scroll Wheel or using the +1/YES and -1/NO buttons.
MISC.
CYMBAL
SNARE
KICK

30 Click Hi

This function sets the sound of the accent click
(the click at the beginning of each measure) of
the metronome.
Rotate the Data Scroll Wheel or use the +1/YES
and -1/NO buttons to select the note number of
the sound you want to use. Check the sound
by pressing the CLICK button to play the
metronome.
MISC.
CYMBAL
SNARE
KICK
Settings:
Note number: 0-127
A Note that the sounds used for the CLICK (hi, mid, low)
may differ depending on the currently selected drum kit since
the voices assigned to the MIDI note numbers are different.
Refer to the drum kit list (P.148) for the voice assignment of
each note number.
122

31 Click Mid

This function sets the sound of the normal click
(the click of each quarter note) of the
metronome.
Rotate the Data Scroll Wheel or use the +1/YES
and -1/NO buttons to select the note number of
the sound you want to use. Check the sound
by pressing the CLICK button to play the
metronome.
MISC.
CYMBAL
SNARE
KICK
Settings:
Note number: 0-127

32 Click Lo

This function sets the sound of other clicks (the
clicks set to notes of finer quantization) of the
metronome.
Rotate the Data Scroll Wheel or use the +1/YES
and -1/NO buttons to select the note number of
the sound you want to use. Check the sound
by pressing the CLICK button to play the
metronome.
MISC.
CYMBAL
SNARE
KICK
Settings:
Note number: 0-127