MIDI
Set the DTXTREME’s MIDI-related settings here.
[UT 9] MIDI 1
Set the Bulk Dump settings on this page. The
available parameters are as follows.
[UT 9]
Transmit Bulk Data
MIDI
all data
Transmit Bulk Data
You can select and sent various types of Bulk
Dump data to, say, a Yamaha MDF3 MIDI Data
Filer or an external MIDI sequencer that can
handle system exclusive messages.
all data: All DTXTREME data is sent.
system: The DTXTREME system data is sent.
cur DKIT: Data for the current drum kit is sent.
all DKIT: Data for all drum kits is sent.
curCHAIN: The current chain data is sent.
allCHAIN: All chain data is sent.
cur SONG: Data for the current song is sent.
all SONG: Data for all songs is sent.
Settings: all data, system, cur DKIT, all DKIT, curCHAIN,
allCHAIN, cur SONG, all SONG
Performing Bulk Dump
1.
In Utility mode, select the [UT 9] page
(1st MIDI page) showing Transmit Bulk
Data.
2.
Select the type of data you wish to
transmit. Press the ENTER/YES button
and you will see an “Are you sure?”
message.
3.
Press the ENTER/YES button again and
the bulk dump will proceed. If you
press the EXIT/NO button instead, the
bulk dump will not proceed and you
will be returned to Drum Kit Play mode.
Page 75