Honda Miimo HRM1000 Owner's Manual page 28

Image
With shortcut wire (HRM1500/HRM1500 Live/
HRM2500/HRM2500 Live)
Acute angle
Less than 10° (17%)
Radius
20
Right angle or
obtuse angle
Condition
The shortcut wire can be laid on slopes of less
than 10°(17%).
If the shortcut wire is laid on a slope of less than
10°(17%), lay it obliquely to the slope.
Boundary wire should be laid so that there is no
excess wire.
The lawnmower can detect the signal from the
boundary wire within a 20 m radius.
If the lawnmower enters a space inside the
work area with no boundary wire within a 20 m
radius, the signal will not be detected and the
lawnmower will stop.
Maximum area: 1000 m² (HRM1000),
1500 m² (HRM1500, HRM1500 Live),
3000 m² (HRM2500, HRM2500 Live)
The boundary wire must not be laid with any
acute angles. (Angles should be more than 90°.)
Installation
25