Honda Miimo HRM1000 Owner's Manual page 30

Installing boundary wire and connecting to the docking
station
Boundary wire
Depth: 1
Connector
Image
Peg
–
20 cm
Operation
Set the boundary wire by using the "LAWN
DIAGRAM" (M page 124).
• Leave enough wire to ensure that small
adjustments can be made, double backing
outside of the loop is acceptable.
• Do not fix the wire until finish the layout.
• The boundary wire should be laid so that there
is no excess wire.
Fix the boundary wire with pegs to the specified
depth as shown.
Attach a connector to both ends of the boundary
wire.
1. Put the boundary wire in the grip area of the
connector.
2. Press the connector click with a plier.
3. Cut the position of 1-2 cm from the each
connector.
Installation
27