Honda Miimo HRM1000 Owner's Manual page 61

Setting the lawnmower operation
• Edge cutting
Home screen
[3.Advanced setting]
With this function, you can mow the unmown area along the boundary wire.
If you set this function on, the lawnmower mows
along the boundary wire when the work timer starts
for the first time on selected day(s).
You can also configure the day(s) of the week on
which you want the lawnmower to mow along the
boundary wire (2 days per week maximum).
58
Menu screen
[2.Garden setup]
J
[2.Edge cutting]
J
[1. Mowing setup]
J
If the edge cutting setting is
enabled, the lawnmower goes
around your garden along
the boundary wire to mow the
edge before starting the usual
mowing.
Select [ON] or [OFF] for configuring the
1
edge cutting, and press the H button.
If select [ON], go to step2. The unmown
part along the boundary wire will be neatly-
mowed.
If select [OFF], you will return to the previous
screen. You can select [OFF] to operate
the lawnmower with reduced battery
consumption.
Edge cutting
ON
Select [CW], [ACW], or [Mixed] for the
2
edge cutting direction.
Then select [NEXT] and press the H
button.
[CW]: Proceed clockwise
[ACW]: Proceed anti-clockwise
[Mixed](Auto mode only): Alternate between
CW and ACW
If the lawnmower is set to the Auto mode, go
to step 3-1.
If the lawnmower is set to the Manual mode,
go to step 3-2.
Edge cutting
ON
Di r ec t i o n
CW
AC W
Mi xe d
J
O FF
O F F
NE X T