Zero Adjust Mode - Chauvet DJ INTIMIDATOR BEAM 360X User Manual

Operation

Zero Adjust Mode

The Intimidator Beam 360X contains a passcode protected mode which allows the user to calibrate and
adjust several of the product's operating parameters.
In order to access this mode, do the following:
1. Press and hold <MENU> for at least 3 seconds.
2. Use <UP> (increases the selected value) and <DOWN> (selects the next value) to enter the
passcode: 2323.
3. Press <ENTER>.
In this mode, the zero positions and levels for the following can be adjusted:
Parameter Function
PAN Pan motor position
TILT Tilt motor position
COLOR Color wheel position
GOBO Gobo wheel position
PRISM Prism position
FOCUS Focus position
FROST Frost lens position
DIMMER Dimmer value
To adjust the zero position or level of one of these parameters, follow the instructions below:
1. Access the Zero Adjust mode.
2. Use <UP> or <DOWN> to select the parameter to be adjusted.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to increase or decrease the selected value, from 000–255.
5. Press <ENTER>.
Intimidator Beam 360X User Manual Rev. 1 17