Rfc Remote Control Operation - Chauvet DJ INTIMIDATOR BEAM 360X User Manual

RFC Remote Control Operation

RFC
<BLACK OUT> Press to turn off all lights until the button is pressed again
The RFC remote will not respond to any inputs when Freeze or Black Out is activated. If
the remote does not respond when a button is pressed, try pressing <FREEZE> or
<BLACK OUT>. Freeze or Black Out may have been inadvertently activated.
16
Button Function
Press to toggle strobe, then use <+> or <-> to increase or
<STROBE>
decrease strobe speed
<DIMMER> Press, then use <+> or <-> to increase or decrease the dimmer
Press to activate automatic mode, then use <+> or <-> to select
<AUTO>
a program
Press, then use <+> or <-> to increase or decrease speed or
<SPD/SENS>
sensitivity
Press to activate sound-active mode, then use <+> or <-> to
<SOUND>
select a program
Press to decrease speed, sensitivity, or the dimmer/color value,
<–>
or to scroll down the list of programs
Press to increase speed, sensitivity, or the dimmer/color value,
<+>
or to scroll up the list of programs
<FREEZE> Press to stop all movement and color chasing
<MANUAL> Press to activate manual mode
In manual mode, press, then use <+> or <-> to increase or
<R>
decrease the color wheel rotation speed
In manual mode, press, then use <+> or <-> to increase or
<G>
decrease the gobo wheel rotation speed
In manual mode, press to set the color and gobo wheels to auto
<B>
mode
In manual mode, press to toggle pan and tilt control, then use
<A>
<+> or <-> to increase or decrease the selected value
In manual mode, press, then use <+> or <-> to increase or
<W>
decrease the prism value
In manual mode, press, then use <+> or <-> to increase or
<UV>
decrease the focus value
<PRESET/ Press to activate presets/colors, then use <+> or <-> to select a
COLOR> preset/color
In manual mode, press, then use <+> or <-> to increase or
<PAN>
decrease the pan value
<GOBO> In manual mode, press, then use <+> or <-> to select a gobo
In manual mode, press, then use <+> or <-> to increase or
<FOCUS>
decrease the focus value
In manual mode, press, then use <+> or <-> to increase or
<TILT>
decrease the tilt value
In manual mode, press, then use <+> or <-> to increase or
<PRISM>
decrease the prism value
Intimidator Beam 360X User Manual Rev. 1
Operation