Mounting; Orientation; Rigging - Chauvet DJ INTIMIDATOR BEAM 360X User Manual

Setup

Mounting

Before mounting the product, read and follow the safety recommendations indicated in the

Orientation

The Intimidator Beam 360X may be mounted in any position; however, make sure adequate ventilation is
provided around the product.

Rigging

• Before deciding on a location for the product, always make sure there is easy access to the product
for maintenance and programming.
• Make sure that the structure and attachment points can support the weight before hanging the
product (see the
• When mounting the product overhead, always use a safety cable. Mount the product securely to a
rigging point, such as an elevated platform or a truss.
• When rigging the product to truss, use a mounting clamp of appropriate weight capacity. The
bracket has a 13-mm hole, which is appropriate for this purpose.
• When power linking multiple products, mount the products close enough for power linking cables to
reach.
• When mounting the product on the floor, make sure that the product and cables are away from
people and vehicles.
Mounting Diagram
Hanging
bracket
To prevent accidental loosening when using a single mounting clamp, be sure to use a
clamp with a captive bolt.
Intimidator Beam 360X User Manual Rev. 1
Technical Specifications).
Mounting clamp
(such as CLP-15
from Chauvet)
Safety cable
(such as CH-05
from Chauvet)
Safety Notes.
Hanging
bracket
5