Zero Adjust Mode - Chauvet DJ Intimidator Beam Q60 User Manual

Operation

Zero Adjust Mode

The Intimidator Beam Q60 contains a passcode protected mode which allows the user to calibrate and
adjust several of the product's operating parameters.
In order to access this mode, do the following:
1. Press and hold <MENU> for at least 3 seconds.
2. Use <UP> (increases the selected value) and <DOWN> (selects the next value) to enter the
passcode: 2323.
3. Press <ENTER>.
In this mode, the zero positions and levels for the following can be adjusted:
Parameter Function
PAN Pan motor position
TILT Tilt motor position
RED Red level
GREEN Green level
BLUE Blue level
To adjust the zero position or level of one of these parameters, follow the instructions below:
1. Access the Zero Adjust mode.
2. Use <UP> or <DOWN> to select the parameter to be adjusted.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to increase or decrease the selected value, from 000–255.
5. Press <ENTER>.
Intimidator Beam Q60 User Manual Rev. 1 Page 15 of 19